Topper Mower
Topper Mower
A topper mower is essential for maintaining the paddocks, fields, and pastures free from overgrown grass, scrub, brambles, saplings, and woody plants. The paddock mowers from Wessex are equipped with heavy-duty blades and effective for regular field and paddock maintenance, ground care, and agricultural applications.
Specifications:
|
AT-110 Series
Features:
|
|
AR Series
This range is robust and durable and suited for private estates, farms, and studs for topping regularly mown grass areas and fine turf. This machine is very easy to tow with ATV, UTV or 4x4 vehicle and comes in various working widths (1.2 and 1.5M), and engine sizes.
The standard grass topper is fitted with side-mounted wheels, allowing ground contours to be followed accurately without scalping. However, if mowing close to borders and fences, etc., is required, the optional rear wheel configuration is the perfect set up. With wheels behind the mower, the weight on the ball hitch is greatly increased, therefore when using a rear wheeled machine, the towing vehicle must have adequate weight capacity on the drawbar, if this is inadequate the third wheel option is available, so the entire weight is now on its own wheels and the drawbar is floating. |
Options:
- Standard side-mounted wheels
- 12.5hp or 13hp Briggs&Stratton engine and electric start option.
- In-line rear wheels (for cutting right to the edge).
- The drawbar can easily be offset to one side, to allow the machine to cover one wheel of towing vehicle.
- These grass toppers feature 3 overlapping rotors to eliminate uncut strips of grass and rigid cutterbar blades for durability.
- Drive is transmitted to the rotors via two vee-belts and a centrifugal clutch. Both belts are tensioned simultaneously by one simple sliding action of the engine mounting bracket.
- The height of the cut is set by repositioning the wheels by means of a spring-loaded pin mechanism on the wheel brackets. A turnbuckle on the drawbar allows the grass mower to be levelled at the desired cutting height.
Specifications:
- 5mm deck. Shot-blasted and powder coated for durability.
- Swivelling ball hitch. Satisfies Health and Safety recommendations.
- Turnbuckle on drawbar. Levels the machine for an even cut.
- Offset drawbar. Cut outside of the quad wheelings.
- Throttle lever. Clips on to ATV rack for user convenience.
- Heavy duty blades with upturn on trailing edge . Durability and strong suction effect.
- Tyres 16x6.50-8inch
- Wheels in line withthe rotors. Very well balanced, minimal weight on the drawbar and excellent ground-contour following.
- Friction welded spindles. Run in heavy cast housings for maximum durability.
- Centrifugal clutch. Allows the blades to be engaged/disengaged from the seat.
- Simple belt adjustment. Both belts are tensioned simultaneously by one simple sliding action of the engine.
AR-120
Cutting width 1.2M Overall width/side wheels 1.7M Cutting height range 25-140mm. Weight 218Kg |
AR-150
Cutting width 1.5M Overall width/side wheels 2.0M Cutting height range 25-140mm. Weight 241Kg |
AR-180
Cutting width 1.8M Overall width/side wheels 2.3M Cutting height range 25-140mm. Weight 329Kg |
Call us on 0333 880 6654 for more information or a quotation.