Petrol Post Driver Adapters

Share

Petrol Post Driver Adapters

The Easy petrol post driver is available with a multi adapter guide kit. Alternatively, you can purchase different adapters for the post knocker machine separately:

• 3-in-1 Multi adapter kit options to suit various needs.
• Magnum: 107 mm suitable to drive in fence posts of 4-inches or 90mm to 100mm posts.
• Reducing: Aluminium from 78mm to 52mm.
• Marquee pin: Specially formulated to drive in pins when erecting professional marquees.
• Square: Suitable for use on 2-inch and 3-inch square section fence posts.
• Custom: Upon request.

​SQUARE ADAPTER 52X52mm diameter
The square adapter has an internal diameter of 52x52mm. It is suitable for use with square posts, to enable the straight edges of the posts to be kept in line.
How to use it:

1. Remove the standard tube using a 6mm hex key, to unscrew the 8 bolts and lock washers. Slide the standard tube off the base of the Post Driver.
2. Slide the square adapter into its place with the orientation required and attach using the same bolts and washers.
3. Remember to use a locking compound on the screw threads to stop them from vibrating out.

Get the best results from your machine by using adapters with the closest fit to your post sizes. Adapters are available in all shapes and sizes within a 107mm round diameter. Custom sizes are also available, please contact us for more information.

Square Adapter 52x52mm diameter

​SQUARE ADAPTER 32X32mm diameter
The square adapter has an internal diameter of 32x32mm. It is suitable for use with Square Posts, predominantly Tree Stakes, to enable the straight edges of the posts to be kept in line. For fitting and best results refer to the other square adapters.

SQUARE ADAPTER 3" or 80x80mm diameter
This square adapter has an internal diameter of 80x80mm. It is suitable for use with square posts to enable the straight edges of the posts to be kept in line.

Square Adapter 32x32mm diameter

Square Adapter 80x80mm diameter

​RECTANGLE ADAPTER 4X2inches diameter
Rectangle adapter has an internal diameter of 4"x2". It is suitable for use with 4" half-round posts.
How to use it:

1. Remove the standard tube using a 6mm hex key to unscrew the 8 bolts and locking washers. Slide the standard tube off the base of the machine.
2. Slide the rectangle adapter into its place with the orientation required and attach using the same bolts and washers.
3. Remember to use a lock compound on the screw threads to stop them from vibrating out.

Get the best results from your post knocker by using an adapter with the closest fit to your post sizes. Adapters are available in all shapes & sizes within 107mm round diameter. Custom sizes are available, please contact us for more information.

Rectangle adapter 4x2inches

​MAGNUM ADAPTER 107mm
The Magnum adapter has an internal diameter of 107mm. This adapter is suitable for driving posts between 90mm - 100mm diameter into field ground.
How to use it:

1. Remove the standard tube using a 6mm hex key, to unscrew the 8 bolts and locking washers. Slide the standard tube off the base of the petrol post driver. Slide the magnum adapter into its place and attach using the same bolts and washers. Remember to use a lock compound on the screw threads to stop them from vibrating out.
2. The maximum capacity of the machine is 4” round diameter.

Our largest adapter is 107mm internal diameter.
When the ground is very dry, compacted, or stony, you will need to make a pilot hole for posts larger than 78mm. This can be either by hand using a pilot-bar, or mechanically using either our pilot core tool or an earth auger. Posts smaller than 78mm should not need a pilot hole.

Magnum Adapter 107mm diameter

​REDUCING ADAPTER 52mm internal diameter
This reducing adapter has an internal diameter of 52mm (2”). It is suitable for use as a reduction from either the standard 78mm sleeve (provided with the CHPD78) or the 78mm reducing adapter.
Suitable for driving posts between 40mm - 50mm diameter into most ground conditions.
How to use it:

1. Straight forward to insert; simply push the 52mm sleeve into the 78mm sleeve and use your petrol post driver. To remove, insert a thin bar into the holes at the base of the adapter, stand on the bar and pull. Very easy to use, with no bolts or washers to lose.

Reducing Adapter 52mm internal diameter

SQUARE ADAPTER 80X80mm
This square adapter has an internal diameter of 80x80mm. It is suitable for use with Square Posts to enable the straight edges of the posts to be kept inline.
How to use it:

1. Remove the standard tube using a 6mm hex key, to unscrew the 8 bolts and lock washers. Slide the standard tube off the base of the petrol post driver.
2. Slide the Square Adapter into its place with the orientation required & attach using the same bolts & washers.
3. Remember to use a Lock Compound on the screw threads to stop them from vibrating out.

80x80mm square adapter

​MULTI-ADAPTER 3-in-1
Multi-adapter 3-in-1 consists on 3 adapters sizes that slot into each other.
The Master size is the 107mm Magnum Adapter – fitted to the machine by 8 x bolts.
Two more adapters slot into the Master and are fixed without the need for bolts or tools.
A variety of sizes are available, depending upon your applications.

• MULTI-UK-A; 107mm/95mm/78mm.
• MULTI-UK-B; 107mm/78mm/52mm.
• MULTI-UK-C; 107mm/85mm/56mm (Clipex).
• MULTI-EURO-A; 107mm/95mm/85mm.
• MULTI-EURO-B; 107mm/85mm/75mm.
• MULTI-EURO-C; 107mm/85mm/65mm.
• Customizations are available.
• Round 4” (107mm).

Multi Adapter 3-in-1

​ROUND 4inch ADAPTER
The round 4″ (107mm adapter) has an internal diameter of 107mm. This adapter is suitable for driving posts between 90mm – 100mm diameter into field ground.
How to use it:

1. Remove the standard tube using a 6mm hex key to unscrew the 8 bolts & locking washers. Slide the standard tube off the base of the machine. Slide the Magnum Adapter into its place & attach using the same bolts & washers. Remember to use a Locking Compound on the screw threads to stop them from vibrating out.
2. The maximum capacity of the machine is 4” round diameter.
3. Our largest adapter is 107mm internal diameter.

When the ground is very dry, compacted, or stony, you will need to make a pilot hole for posts larger than 78mm. This can be either by hand using a Pilot-Bar, or mechanically using the petrol post driver with our pilot core tool or an earth Auger. Posts smaller than 78mm should not need a pilot hole.

4inch 107mm round adapter

ANGLE IRON ADAPTER
Angle iron adapter (52x52x8mm).

Angle iron adapter 52x52x8mm

CUSTOM ADAPTER
​Custom adapter 10mm to 107mm in any Shape or Profile.
Get in touch for a free quotation with your post dimensions ; most post sizes are possible.
Previously designed for

• T-Bar posts.
• Vineyard posts.
• Ground anchors.
• Riverbank restraints.
• Estate fencing.

Custom Adapter

Call us on 0333 880 6654 for sale prices and more information.