Hydraulic Power Tools
The Hydraulic Power Tools from Fresh Group is powered by a Honda GXV390cc 13HP engine, with an adjustable oil flow rate lever to allow the operator to control the oil flow rate from 20 to 30 litres per minute. This is a very good feature when using different hydraulic power tools. For example a hydraulic hole borer or auger, only needs a low flow rate, whilst a hydraulic fence post knocker requires a higher flow rate. The hydraulic concrete breaker can be set up on high or low oil flow rates, whilst the hydraulic diamond cutting tool requires the highest oil flow rate requiring our higher powered Honda engine to give 40 litre per minute flow rate.
The oil rate of our standard hydraulic power tool pack range from 20 to 30 litres per minute.This hydraulic power pack is built to a very high standard and is mounted onto a frame with 2 wheels at one end and a foldable hand pull handle at the other end, for easy transport.
A unique and very useful feature of our hydraulic power tools set up is the fact that it has been designed to be mounted onto our Muck Truck max dumper, when fitted with the flat bed attachment. This now enables the operator to take the power tool pack over rough ground and use it in more remote places. An example of where this would happen is a fencing contractor putting up deer fencing posts.
We supply Atlas Copco hydraulic power tools as we find these offer the best quality and the best price.
How hydraulic power works
The reason why hydraulic power is so popular is because a tremendous amount of power can be produced through this simple system at a relatively low cost.That is why most construction machinery is powered by hydraulics.
Hydraulic oil is pumped by the hydraulic pump motor through the hoses to the cylinders all under high pressure. The speed of the operated cylinders is controlled by the spoil valve.
Call us on 0845 3731 832 for more information or a quotation.