Professional Turf Care Systems

Mounted Frame for 60" Professional Ground Care "D" System

Ideal for use on paddocks, golf courses, football pitches, race tracks etc, this turf care system gives all the advantages and benefits of aeration and slitting, allowing air into roots to assist drainage and slow down the build up of thatch. The carrier frame has a cat 1 three point linkage tractor mounting as standard but other categories can be supplied on request - so please call. A weight tray is incorporated into the design which gives a facility to add top weight to gain required penetration. This tray is also extremely useful for the transportation of tools etc. For safety purposes a rear mesh guard cover is fitted. The floating roller will push back any plucked divots without closing the penetrations; the roller can be lifted out of work if required. An adjustable scraper bar is fitted to the rear of the roller.
Specification Model FGDMF
Overall width: 1780 mm (70")
Weight: 170 kg
Maximum ballast to be added to weight tray: 250 kg (550 lbs)
Call us on 0845 3731 832 for more information or a quotation.

60" Mounted Lawn Deep Aerator

​This lawn aerator has nine heavy duty aeration discs on 50 mm stainless steel axle c/w bearings which easily bolts onto the carrying frame. The aerator discs will penetrate up to 180 mm (7") in suitable lawn conditions.
Specification Model FGDAM
Working Width: 1500 mm (60in)
Number of discs: 9
Maximum Penetration: 180 mm (7in)
Main Shaft & Bearings: 50 mm
Add-ons/Mounted Frame for D System
Must be used in conjunction with carrying frame FGDMF.
​Call us on 0845 3731 832 for more information or a quotation.

Deep Mounted Lawn Slitter

Nine heavy duty slitter 'stars' on a 50 mm stainless steel axle c/w bearing easily bolts to the carrying frame. Up to 125 mm (5") can be achieved in suitable lawn conditions and extra weight may be added if required.
Specifications Model FGDSM
Working width: 1500 mm (60")
Main shaft bearings: 50 mm
Maximum depth: 125 mm (5")
Must be used in conjunction with carrying frame FGDMF.
​Call us on 0845 3731 832 for more information or a quotation.

Hollow Tine Corer

This hollow tine corer bolts onto the carrying frame in the same way as the lawn aerator or slitter. The revolving discs fitted with hollow spoon tines delve into the turf surface to remove, on average, a 75 mm (3") core. Removing cores from areas of turf allows air and water to have direct access to the root system; if lawn sand is applied the core holes will fill with sand to give the maximum advantage to the root system. The rear roller is lifted out of work for this operation.
Specification Model FGDHTC
Working width: 1500 mm (60")
Main shaft bearings: 50 mm
Maximum core depth: 75 mm (3")
Must be used in conjunction with carrying frame FGDMF.
​Call us on 0845 3731 832 for more information or a quotation.

Deep Mounted Lawn Slitter with Replaceable Tines

The fine turf slitter is equipped with slender hardened blades with knife edges. This gives a clean penetration into soil leaving the surface free from any lawn tearing or plucking. The blades when requiring replacement can have new ones bolted on. Depending on soil condition a penetration of up to 150 mm (6") can be achieved.
Specification Model FGDSM2
Working width: 1500 mm (60")
Number of discs: Nine
Blades per disc: Five
Must be used in conjunction with carrying frame FGDMF.
​Call us on 0845 3731 832 for more information or a quotation.

Dethatching Rake

This dethatching rake fits onto the rear of the multi tool frame.The two rows of heavy duty spring tines draw through the lawn surface to remove all unwanted thatch and dead grass and promote new and healthy growth.
Specification Model FGDDTC
Working width 1500 mm (60")

​Call us on 0845 3731 832 for more information or a quotation.