Muck Truck - Frequently asked questions
How easy is it to steer a loaded Powerdrive Muck-truck?
Just ease the handles off the ground and the weight distribution
does the rest. It is as easy to steer fully loaded as it is to steer when it's empty.
How do I tip a loaded Muck-truck?
Release the skiplock lever with the right hand and slightly raise both handles. The skip will pivot and dump the load.
When tipped, does the front of a loaded Muck-truck hit the ground?
No. The skip tips over the centre so there's a good clearance for your load to tip cleanly out of the skip
How much will a 6 cu ft skip carry?
2½ barrow loads, ¼ tonne (250kg) sand or cement etc, 120 loose bricks, 25 x 1m rolls of turf.
Can I tip into the skip with my standard sized cement mixer?
Yes provided it is fitted onto a frame.
How easy is it to maintain?
The transmission is a sealed unit and requires no attention other than periodic brake adjustment. All engine adjustments, including replacing the air filter and spark plug, are readily accessible without removing covers. To change the drive belt takes less than 5 minutes with no specialist tools required.
How readily available are spare parts?
Any order phoned or faxed before 11.00am can be delivered the next working day. If you provide us with a postal code spares can even be delivered to a working site.
How quickly can attachments be fitted?
In seconds. Just remove one lynch pin, slide attachment off/on two locator brackets, (one is longer to make things really easy), and replace the pin. No tools required.
What gradient will a fully loaded Muck-truck climb?
Fitted with powerdrive, up to 30°.
How long has the Muck-truck been in production?
We have been making the Muck-truck for over 9 years.
